Initial ventilator settings |
Calculate predicted body weight (PBW) |
Male = | 50 + 2.3 [height (inches) - 60] OR |
50 + 0.91 [height (cm) - 152.4] |
Female = | 45.5 + 2.3 [height (inches) - 60] OR |
45.5 + 0.91 [height (cm) - 152.4] |
Set mode to volume assist-control |
Set initial tidal volume to 6 mL/kg PBW |
Set initial ventilator rate ≤35 breaths/min to match baseline minute ventilation |
Subsequent tidal volume adjustment |
Plateau pressure goal: Pplat ≤30 cm H2O |
Check inspiratory plateau pressure with 0.5 second inspiratory pause at least every four hours and after each change in PEEP or tidal volume. |
If Pplat >30 cm H2O, decrease tidal volume in 1 mL/kg PBW steps to 5 or if necessary to 4 mL/kg PBW. |
If Pplat <25 cm H2O and tidal volume <6 mL/kg, increase tidal volume by 1 mL/kg PBW until Pplat >25 cm H2O or tidal volume = 6 mL/kg. |
If breath stacking (autoPEEP) or severe dyspnea occurs, tidal volume may be increased to 7 or 8 mL/kg PBW if Pplat remains ≤30 cm H2O. |
Arterial oxygenation and PEEP |
Oxygenation goal: PaO2 55 to 80 mmHg or SpO2 88 to 95 percent |
Use these FiO2/PEEP combinations to achieve oxygenation goal: |
FiO2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 |
PEEP | 5 | 5 to 8 | 8 to 10 | 10 | 10 to 14 | 14 | 14 to 18 | 18 to 24 |
PEEP should be applied starting with the minimum value for a given FiO2. |